Skip to main content

Doepfer FP5 foot controller


FP5 foot controller

  • about 1m cable length
  • Stereo jack plug 1/4"
  • potentiometer 10k linear (suitable e.g. for LMK4+/2+ or A-177)

- dimensions: overall: 25 x 12 x 11 cm (down position) resp. 25 x 12 x 15 cm (up position)

- angle of rotation: 20 degrees

Pin out of the stereo jack plug: left (ccw) terminal of the potentiometer = GND terminal of the jack plug middle terminal (wiper) of the potentiometers = ring of the jack plug right (cw) terminal of the potentiometer = tip of the jack plug

Pay attention that not the full rotating angle of the potentiometer is covered but only about 50%. If the end terminals of the potentiometer are e.g. connected to GND and +5V only a voltage range 0...+2.5V is covered ! Of course the foot control inputs of our keyboards take this special behaviour into consideration but e.g. for DIY/OEM applications one has to pay attention to the limited rotating angle.

Choose your Language


Alex4

Alex4 Distribution GmbH
Lessingstr. 98, 100 – Haus 11
13158 Berlin
Germany

This email address is being protected from spambots. You need JavaScript enabled to view it.
www.alex4.de

Tel +49(0)30 - 61 65 100 40
Fax +49(0)30 - 61 65 100 49


Cookie Consent

By continuing to browse or by clicking 'Accept', you agree to the storing of cookies on your device to enhance your site experience and for analytical purposes.